英文简历（电子工程师）ELECTRONICS[精选合集]

第二篇：电子工程师英文简历

电子工程师英文简历

ELECTRONICS ENGINEER(Experienced)

Sandy Lin 15/F,TOWER2 ,BRIGHT CHINA,BUILDING1,BEIJING.BACKGROUND SUMMARY

Over eleven years of extensive computer/electronics experience.Versed in both digital and analog electronics withspecific emphasis on computer

hardware/software.Special expertise in system and component evaluation.Network supervisor responsible for installing/maintaining Arcnet LAN system.Proficient in assembly and C programming languages.Excelent communication skills including written,verbal and interpersonal.PROFESSIONAL WORK EXPERIENCE

Stevenson Data Systems,Los Angeles,CA 1981-1993

Components Evaluation Engineer 1992-1993

Responsible for the characterization and evaluation of, and approved vendors list for:Power supplies,oscillators,crystals,and programmable logic used in desktop and laptop computers.Evaluated and recommended quality components that increased product profitability.Created adn developed power supply test plan used for evqluating third party power supplies.Interacted with vendors to resolve problems associated with components qualification.Technical advisor for Purchasing.Promoted to engineer II.Design Evaluation Engineer 1990-1992

Evaluated new computer product designs ,solving environmental problems on prototype computers.Conducted systems analysis on new computer profucts to ensure hardware,software and mechanical design integrity.Designed hardware and software for PC,ISA bus programmable load board used for environmental testing.Performed reliability lift testing on computer systems.Installed/maintained 20

user.Novell,Arcnet LAN system.Examined system and sub-system susceptibility to electrostatic discharge in order to meet IEC-801-2 industry standards.Analyzed complete power and load of computer system and subsystem to verify power and load

estimations.Assistant Engineer 1981-1990

Performed extensive hardware evaluation ion prototype computers,tested prototype units for timing violation using the latest state-of-the-art test equipment,digital oscilloscopes and logic analyzers.Performed emvironmental,ESD and acoustic testing.Designed and built a power-up test used to test prototype computers during cold boot.EDUCATION

Bachelor of Science in Electrical Engineering

--University of Southern California 1990

Associate in Engineering Electronics

--University of Southern California 1981

Job descriptions emphasize candidate's accomploshments.Work history is stated in reverse chronological order,with most recent employment listed first

第三篇：英文简历(电子工程师)

英文简历（电子工程师）ELECTRONICS ENGINEER(Experienced)

Sandy Lin 15/F,TOWER2 ,BRIGHT CHINA,BUILDING1,BEIJING.BACKGROUND SUMMARY

Over eleven years of extensive computer/electronics experience.Versed in both digital and analog electronics withspecific emphasis on computer

hardware/software.Special expertise in system and component evaluation.Network supervisor responsible for installing/maintaining Arcnet LAN system.Proficient in assembly and C programming languages.Excelent communication skills including written,verbal and interpersonal.PROFESSIONAL WORK EXPERIENCE

Stevenson Data Systems,Los Angeles,CA 1981-1993

Components Evaluation Engineer 1992-1993

Responsible for the characterization and evaluation of, and approved vendors list for:Power supplies,oscillators,crystals,and programmable logic used in desktop and laptop computers.Evaluated and recommended quality components that increased product profitability.Created adn developed power supply test plan used for evqluating third party power supplies.Interacted with vendors to resolve problems associated with components qualification.Technical advisor for Purchasing.Promoted to engineer II.Design Evaluation Engineer 1990-1992

Evaluated new computer product designs ,solving environmental problems on prototype computers.Conducted systems analysis on new computer profucts to ensure hardware,software and mechanical design integrity.Designed hardware and software for PC,ISA bus programmable load board used for environmental testing.Performed reliability lift testing on computer systems.Installed/maintained 20

user.Novell,Arcnet LAN system.Examined system and sub-system susceptibility to electrostatic discharge in order to meet IEC-801-2 industry standards.Analyzed complete power and load of computer system and subsystem to verify power and load

estimations.Assistant Engineer 1981-1990

Performed extensive hardware evaluation ion prototype computers,tested prototype units for timing violation using the latest state-of-the-art test equipment,digital oscilloscopes and logic analyzers.Performed emvironmental,ESD and acoustic

testing.Designed and built a power-up test used to test prototype computers during cold boot.EDUCATION

Bachelor of Science in Electrical Engineering

--University of Southern California 1990

Associate in Engineering Electronics

--University of Southern California 1981

Job descriptions emphasize candidate's accomploshments.Work history is stated in reverse chronological order,with most recent employment listed first.更多简历模板请访问http://

最专业的简历模板网站

第四篇：质量工程师英文简历

质量工程师

******** Xu

Brief Bio:

Born on Aug.21, 1979, in Jiaxing, Zhejiang Province

Graduate from Department of Physics, ******** University of Shanghai(1997-2001)as Bachelor

Associate engineer in Product Reliability Engineering in******Shanghai

Engineer in Process Reliability Development in ******* Beijing, 2004-2005

Quality engineer in ********, since Sep.2005

Experience:

Part I--Management

Set up ********* both in Shanghai(2001)and Beijing(2004)for ******:

--evaluate equipments of process and product reliability tests

--plan layout and coordinate facility system

Manager of the ********Shanghai(2001-2004), in charge of:

--spare parts

--human resource

--PM and calibration, etc.Coordinator and internal auditor of ISO9001, ISO14001 and OHSAS18001,CCAR and inline MRB chairman for 4 customers of Amkor China(CABGA, PBGA and FCPGA)

Internal quality project owner of:

--Customer audit analysis

--Automation system

--Factory moving qualification, etc.In a short summary:

Various experiences in quality system, customer audit, task force teamwork, and management of resources.Experience:

Part II--Technology

Owner of package related product reliability tests(2001-2004), including pre-conditioning, TC, TS, THB, HAST, PCT, etc.Owner of wafer level process reliability tests(2004-2005), including:

--Dielectric related: TDDB, Vramp, Jramp, constant-J and P2ID

--Device related: HCI and NBTI

--Interconnection related: Isothermal, SWEAT and Iramp

In a short summary:

Comprehensive in reliability, parametric and functional tests, from the failure mechanism to the test methodology.Skills:

Implant PDCA and teamwork into everyday work

Fluent in both written and spoken English, and acknowledged outstanding in expression and communication

Familiar with UNIX system, as well as C and BASIC programming

Familiar with Excel macro programming for data analysis

Familiar with statistical concept and tools, good at DOE and analysis by JMP

Contact me if you are interested:

Tel:(0)136********

Email: *******@msn.com or *******@sina.com

第五篇：英文简历(工业工程师)

英文简历（工业工程师）INDUSTRIAL ENGINEER

Sandy Lin 15/F,TOWER2 ,BRIGHT CHINA,BUILDING1,BEIJING.PROFESSIONAL EXPERIENCE

1985-Present LEYNER CORPORATION,Lake Charles,LA

Industrial Engineer

Provide floor support engineering in printed wire assembly(PWA)and subsystem assembly(SSA)areas.Purchase capital equipment.Interface with vendors.Justify expenditures.Design plant layout fixtures,and flow charts of material.Program automatic equipment.Write process sheets and rework procedures.Recommend changes to product to allow ease of manufacture.Implement design changes.Inititate methods and process improvements.Troubleshoot problems.Effect disposition or rejection of material.Provide assistance to all other departments.1984 PRUDENCE D.MCHARRISON LABORATORY,Ruston,LA

Engineering Assistant

Conducted variety of tests including Tensile.Compression,and creep tests on molded parts.Responsible for production of plastic test specimens,and mounting polishing,and microscopic analysis.Designed tools and fixtures for Instron machine.1982/83 DUCHESS COMPONENTS,Baton Rouge,LA

Molding Room Attendant,1983

Operated and maintained machine producing epoxy preforms.Maintained records on inventory,loss of material,and quality control.Machine shop attendant,1982

Operated lathes,milling and grinding machines;monitored welding and heat treatments.Read blueprints.EDUCATION

LOYOLA UNIVERSITY AT NEW ORLEANS,College of Engineering,New Orleans,LABachelor of Science Degree in Industrial Technology,1985

Minor concentration in computer science.PROFESSIONAL AFFILIATIONS/CERTIFICATIONS

Member,Society of Manufacturing Engineers,Leaner Management Club Certified Manufacturing Technologist and Solderer.NOTICE

Relevant Work experience is emphasized while other positions are de-emphasized.Chronological format illustrates a clear career path.更多简历模板请访问http://

最专业的简历模板网站